How to install 2017 Scania SDP3 2.27 for VCI2 VCI3?

How to connect wifi with vxdiag VCX NANO Ford/GM/Toyota

How to use the Piwis tester II code Porsche rear end electronics?

How to Install Kess V2 firmware V5 017 Ksuite V2.23 software buyobdii

Full Version FVDI ABRITES Commander with 18 softwares

Full Version FVDI ABRITES Commander with 18 softwares

I just want to purchase it (Full FVDI ABRITES Commander Full Version) and want to know upto which year of  AUDI it offers component protection ?

What’s component protection?Mainly about airbag reset function? No others ?

One of customers who bought it to do Airbag Reset funtion,but is not good .

He offered some pictures about the error.

We got reply from factory who informed that FVDI can not do airbag reset function right now. It is on developing .

How to install fvdi 2015 on windows 7 BUYOBDII-COM

How to use Toyo KEY PRO II?

TOYO KEY PRO OBD II FEATURES:

1, This TOYO KEY PRO OBD II Can work alone, it’s plug-and-play.
2, Works on 40/80/128 BIT (4D, 4D-G, 4D-H)
3, You can use this device to match 2 master keys and 1 valet key.

TOYO KEY PRO vs. TOYO KEY TJECU:
TOYO KEY PRO can work alone, it is plug-and-play.
TOYO KEY TJECU is supposed to work with cn900 mini / ND900 mini

HOW TO USE TOYO KEY PRO Ⅱ?

1. Insert the key into the ignition lock.

2.Plug the TOYO KEY Pro OBD-II  adapter  into the car.

3. When you hear the beeps for the first time, pull out the key and insert the key again.

4. When you hear the beeps again, it means the first key is matched successful. Meanwhile the immobilizer light is on and the car enters the matching mode.

5. Pull out the first key , then insert the keys which need to be matched one by one.

6. If the  immobilizer light goes out, that means all work done and you can start the car.

7. If the  immobilizer light is on all the time, use any key on-off it for 5 times to finish matching.

==================================

24hour Online Customer Service:

E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

HTTP://WWW.BUYOBDII.COM

==================================

FVDI2 PROGRAM A NEW KEY ON AUDI A6 BCM2 WHEN ALL KEYS LOST

FVDI2 PROGRAM A NEW KEY ON AUDI A6 BCM2 WHEN ALL KEYS LOST

BUYOBDII.COM engineer has successfully program new key on Audi A6 2016 year BCM2 when all keys have lost by using FLY FVDI2 for VAG FVDI second generation key programmer.

You can read BCM2 P flash and D flash by Orange 5 eeprom programmer or CG100 flash programmer.

Read ELV flash by OEM Orange 5.

Before doing all key lost, the key has been prepared to the dealer key and learned to the car, but cannot turn ignition ON or start the engine.

Start FLY OBD Terminator, select Immobilizer from the main menu, then VAG/KeyMaker/Audi A6 A7 A8 Touareg

Load BCM2 P flash and D flash (EEPROM)

There are 3 scenarios you can select:

1- have a working key

2- have a ELV dump

3- have the decoded ISK file

If all key lost, you should select option 2 (have a ELV dump)

Put the key into the coil

Then may turn ignition on with the programmed key

Turn ignition on and begin  logging data at the internal CAN BUS

FVDI2 commander software has a 300 seconds countdown timer

During logging, keep ignition on

Then, log extra data in 100 seconds

During logging extra data, you should turn ignition on/off for several times

Data log finished!

Save the logo data as a file.

Begin decoding log data by FLY server via Internet

Usually, it needs 30 minutes or less

For this car, it takes 12 minutes to decode

At last, 32 bytes ISK decoded successfully!

Save data

Put the key into the coil again

Fvdi2 is verifying…

Write the chip successfully!

The programmed key can be used to start the engine.

==================================

24hour Online Customer Service:

E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

HTTP://WWW.BUYOBDII.COM

==================================